Materials science powder and composite materials and coatings

Departments and Laboratories

• 05. Department of Materials aerospace technique
• 05.01. Laboratory of light--thermal technologies and solar technology
• 10. Department of Material Dispersion and Rolling Plastic Deformation
• 18. The Department of Rheological and Physical-Chemical Foundations of Powder Materials Technology
• 18.01. Laboratory of the Mechanical Alloying and Dispersion Strengthening Materials
• 18.02. Laboratory of Hydrogen Treatment of Materials
• 21. Department of Thermomechanical Treatment of Higher-Melting-Point Materials
• 21.01. Laboratory of Physics and Technology of Materials Processing with Concentrated Power Floatations
• 25. Physical chemistry and refractory oxides technology department
• 25.01. Laboratory of Basaltic Fibres
• 33. Composite Materials Department
• 33.01. Laboratory of Instrumental Material Science
• 36. Department of Abrasion- and Corrosion-Resistant Powder Construction Materials
• 36.01. Laboratory of Electrotechnical Composite Materials
• 49. Department of Highly-Persistant Surface Layers Material Science and Engineering
• 58. Solids Structural Chemistry Department
• 58.01. Laboratory of Continuous Refractory Fibres and Technology of the Gas phase Chemical Besieging
• 58.02. Materials and electrochemical processes in hydrogen energy industry
• 67. Department of Hydrogen Material Science and Carbon Nanostructures
• 67.01.
• 81.

Staff

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

Publications

2024 2023 2022 2021 2020 2019 2018 2017 >> 1997 All Search

• Durometric analysis of hardening of the near-surface layer of ADI during friction at the influence of the TRIP effect
  Y.Podrezov, N.Minakov, B.Shurigin, A.Golubenko, K.Grinkevich, M.Askerov, K.Gogajev (2023) Uspihi materialoznavstva, #7, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.37-49 DOI: https://10.15407/materials2023.07.004
• Low-temperature phase stability of ceramics in the ZrO₂—Y₂O₃—СеO₂ system produced after heat treatment of the starting powders at 850 °C
  I.Marek, O.Dudnik, V. A. Vynar, V.Redko, O.Ruban (2023) Uspihi materialoznavstva, #7, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.50-60 DOI: https://10.15407/materials2023.07.005
• Hypothetical CeO₂—Ln₂O₃ phase diagrams (Ln = yttrium lanthanides, Y₂O₃)
  A.Makudera, S. M. Lakiza, O.Dudnik (2023) Uspihi materialoznavstva, #7, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.61-68 DOI: https://10.15407/materials2023.07.006
• EFFECTIVE PLASTIC PROPERTIES OF POROUS MATERIALS WITH AN INVERSE OPAL STRUCTURE 
  P.O. Korobko, A.Kuzmov (2023) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.88-98
• EVOLUTION OF PORE STRUCTURE IN COMPACTS PRODUCED FROM NICKEL CARBONYL POWDERS DURING SINTERING 
  P.Radchenko, O.Getman (2023) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.33-41
• WEAR-RESISTANT COATINGS PRODUCED FROM TiN–TiB₂  AND TiN–Si₃N₄ COMPOSITES BY ELECTROSPARK DEPOSITION AND LASER TREATMENT
  R.Lytvyn, K.Grinkevich, О.М. Myslyvchenko, I.Tkachenko, A.Bloschanevich, S.Ivanchenko, O.DEREV’YANKO , A.Stegniy, V.Belik, O.Zgalat-lozinskyi (2023) Powder Metallurgy, #09/10, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.135-146
• MODELING THE GAS PERMEABILITY OF THE POWDER BED IN A ROTARY FURNACE
  A.Maksimenko, O.Getman, M.Shtern, E.A. Olevsky (2023) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-10
• SIMULATION OF TWO-STAGE HOT FORGING OF POROUS WORKPIECES INVOLVING SEVERE PLASTIC DEFORMATION 
  G.Bagliuk, S.Kyryliuk, N.K. Zlochevska (2023) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.57-67
• PROPERTIES OF METAL, NITRIDE, OXIDE, AND CARBIDE COATINGS PRODUCED FROM HIGH-ENTROPY ALLOYS
  V.Gorban, A.A. Andreev, V.A. Stolbovy, S.Firstov, M.Karpets, N.Danilenko (2023) Powder Metallurgy, #07/08, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.110-123
• SYNTHESIS OF FINE MoSi₂–Si₃N₄ COMPOSITE POWDERS
  I.Kud, R.Lytvyn, L.Krushynska, O.Myslyvchenko, R.Medyuh, O.Zgalat-lozinskyi (2023) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-15
• LASER PROCESSING OF THE HIGH-ENTROPY VNb₂TaCrMoWTi_0.3В₀.₆   ALLOY COATING FOR WEAR REDUCTION IN DRY FRICTION WITH DIFFERENT COUNTERFACES
  O.Myslyvchenko, R.Lytvyn, K.Grinkevich, O.Zgalat-lozinskyi, I.Tkachenko, A.Bloschanevich, S.Ivanchenko, V.M. Novichenko, O.P. Gaponova (2023) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.94-106
• The influence of Ti + TiC additive on thermal stability and decomposition kinetics of nanosized MgH₂ phase in Mg-based  mechanical alloys 
  O.Iershova, V.D. Dobrovolsky, Y.Solonin (2023) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.107-118
• CATALYTIC EFFECT OF RTO₃ PEROVSKITES ON HYDROGEN STORAGE AND HYDROLYSIS PROPERTIES OF MAGNESIUM HYDRIDE 
  O.P. Kononiuk, I.Yu. Zavaliy, V.V. Berezovets, A.R. Kytsya, I.V. Lutsyuk, L.O. Vasylechko, M.V. Chekailo, Y.Solonin (2023) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.136-147
• HIGH-TEMPERATURE OXIDATION OF HIGH-ENTROPY AlCrFeCoNiMn_х ALLOYS
  H.Rokitskaya, M.Karpets, M.I. Yakubiv, N.Krapivka, A.Samelyuk, M.P. Naumenko (2023) Powder Metallurgy, #05/06, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.119-135
• MECHANICAL AND FUNCTIONAL PROPERTIES OF COMPOSITE COATINGS WITH FINE REINFORCEMENTS  PRODUCED FROM GALVANIC PROCESSING WASTE
  D.M. Samchenko, G.Bagliuk, G.M. Kochetov, O.V. Lastivka, D.O. Derecha, T.O. Prikhna (2023) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.124-133
• MICROWAVE SINTERING OF 3D PRINTED COMPOSITES FROM POLYMERS REINFORCED WITH TITANIUM NITRIDE PARTICLES 
  O.Zgalat-lozinskyi, O.O. Matviichuk, R.Lytvyn, O.Myslyvchenko, N.O. Zgalat-Lozynska (2023) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.41-52
• INTERACTION IN THE Ni–Sc–Zr TERNARY ALLOYS ALONG THE 77.8 at.% Ni SECTION. ELECTROCHEMICAL PROPERTIES OF THE ALLOYS
  E.Semenova, O.Fomichov, K.Meleshevich, V.Talash, Y.Rudenko (2023) Powder Metallurgy, #03/04, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.134-143
• Effective plastic behavior of porous materials with an inverse opal structure
  P. Korobko, A.Kuzmov, M.Shtern, O.Kirkova (2023) Uspihi materialoznavstva, #6, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.32-40 DOI: https://10.15407/materials2023.06.032
• Creep of low-plastic heat-resistant materials in bending
  Y.Podrezov, D.Verbylo, V.Danilenko, Y.Yevich, O.Tolochyn, N.Tsyhanenko (2023) Uspihi materialoznavstva, #6, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.58-74 DOI: https://10.15407/materials2023.06.058
• Thermodynamic properties of melts of the Cu—In—La system
  V.Sudavtsova, L.Romanova, Kudin V.G, O.Dudnik, N.Podopryhora (2023) Uspihi materialoznavstva, #6, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.115-127 DOI: https://10.15407/materials2023.06.115
• INFLUENCE OF DEFORMATION TEMPERATURE ON THE FORMATION OF CONTACTS IN TITANIUM POWDER RIBBONS PRODUCED BY SYMMETRIC AND ASYMMETRIC ROLLING
  V.Voropaev, K.Gogajev, O.Vdovychenko, Y.Podrezov, Y.Yevich (2023) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.28-40
• PROCESS PROPERTIES OF GAS-ATOMIZED AND GROUND FINE MIXTURES OF HIGH-SPEED STEEL POWDERS
  O.Radchenko, K.Gogajev, V.Nazarenko (2023) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.3-12
• DENSIFICATION KINETICS OF THE TiB₂–20 wt.% MoSi₂ COMPOSITE DURING NONISOTHERMAL SPARK PLASMA SINTERING
  M.Kovalchenko, R.Lytvyn, I.Kud, O.Zgalat-lozinskyi (2023) Powder Metallurgy, #01/02, Kiev: Frantsevich Institute for Problems of Materials Science NASU, P.41-51