Study of wetting of SnO2—In2O3-ceramics with copper-silver melts

 
T. V. Sydorenko 2,
   

1 I. M. Frantsevich Institute for Problems of Materials Science of the NAS of Ukraine, Kyiv
2 Presidium of the National Academy of Science of Ukraine, Kyiv
valpol13@ukr.net

Usp. materialozn. 2024, 8/9:90-96
https://doi.org/10.15407/materials2024.08-09.009

Abstract

To improve the wetting of oxide ceramic with metals in addition to traditional dopands (Ti, Zr, Nb, etc.), which have a high chemical affinity to solid phase atoms, alternative active additions can also be used. In particular, it relates to non-metallic electronegative elements VIa—VIIa groups of the periodic system (O, S, Se, F, Cl, Br), which have a high affinity to electron. Such additives are able to reduce free surface energy at the liquid/gas and liquid/solid interfaces and in such a way improve the wetting. The SnO2—In2O3 system is the most optimal material for the layers of the socalled TCO (Transparent Conductive Oxide). Since the cost of metal indium and its compounds continues to grow and new technologies are actively developing, there is a need to find alternative TCO that would have less In2O3 content. That is why systems containing SnO2, doped by relatively small amounts of In2O3 were explored. Ag—Cu based fillers is often used to joint oxide materials. In this case, there is a significant effect of the additives of the third component on the activity of oxygen in liquid metal, which causes an increase in oxygen content directly in the melt. Specially synthesized high-dense ceramics based on SnO2, which was received by adding 5, 10, 20 or 40% (mass.) of In2O3 with subsequent sintering, were used for wetting experiments. The experimental data indicate that in vacuum and air copper, added to the silver melt, significantly improves wetting on all types of the studied ceramic substrates, as well as the wetting is improved with increasing of the In2O3 content in the substrate. A dense transition layer of about 10 µm, which contains a large amount of copper, is formed on the interfacial border. A similar phenomenon was observed at the inter-phase boundary of other oxide materials. The improvement of wetting is explained by an increase in the solubility of oxygen in the melt, which acts as an adhesive-active element, with the addition of copper and increased electronegativity of the substrate with increasing content of In2O3.


Download full text

CONTACT INTERACTION, INDIUM OXIDE, METAL MELT, SEMICONDUCTOR, TIN DIOXIDE, WETTABILITY

References

1. Sydorenko, T. V., Poluyanskaya, V. V., Naidich, Yu. V. (2018). The effect of oxygen partial pressure on the processes of wetting and contact interaction in systems containing metal melts and ceramics based on tin dioxide. Adgeziya rasplavov i paika materialov, Vyp. 51, pp. 3—13 [in Ukrainian].

2. Granqvist, C. G., Hultaker, А. (2002). Transpparent and conducting ITO films: new developments and applications. Thin Solid Films, Vol. 411, is. 1, pp. 1—5.

3. Jantzen, T., Hack, К., Yazhenskikh, Е., Müller М. (2018). Thermodynamic assessment of oxide system In2O3, SnO2, ZnO. Chimica Techno Acta, Vol. 5, No. 4, pp. 166—188. http://dx.doi.org/10.15826/chimtech.2018.5.4.02

4. Kittral, R. V. (2000). Chemicalsensors. Moskva: Nauchnyy mir, 420 p. [in Russian].

5. Vuong, D. D., Sakai, G., Shimanoe, K., Yamazoe, N. (2004). Preparation of grainsize-controlled tin oxide sols by hydrothermal treatment for thin film sensor application. Sens. Actuators B, Vol. 103, pp. 386—391. http://dx.doi.org/10.1016/j.snb.2004.04.122

6. Koltun, M. M. (1976). Sective optical surfaces of solar energy converters. Moskva: Nauka, 148 p. [in Russian].

7. Gerisher, X. (1982). Solar energy conversion. Voprosy phiziki tverdogo tela, Moskva: Energoizdat, pp.106—189 [in Russian].

8. Chopra, K. L., Major, S., Pandya, D. K. (1983). Transparent conductors — A status review. Thin Sol. Films, Vol. 102, No. 1, pp. 1—46. https://doi.org/10.1016/0040- 6090(83)90256-0

9. Kostlin, H., Jost, R., Lems, W. (1975). Optical and electrical properties of doped In2O3 films. Phys. Stat. Solid. A, Vol. 29, is. 1, pp. 87—93.

10. Naidich, Yu. V., Krasovskyy, V. P., Durov, O. V., Sydorenko, T. V. (2015). Wettability and brazing of iono–ionocovalent ceramic materials by metal alloys containing electronegativeelements. Proc. of 6th Int. Brazing and Soldering conf. Long Beach, CA, USA, pp. 40—48.

11. Nekrasov, B. V. (1973). Basics of general chemistry. Moskva: Chimiya, T. 2, 688 p. [in Russian].

12. Fromm, E., Gerbhardt E. (1980). Gases and carbon in metals. Moskva: Metallurgiya, 712 p. [in Russian]. https://libarch.nmu.org.ua/handle/GenofondUA/69292

13. Heward, W. J., Swenson, D. J. (2007). Phase equilibriain the pseudo-binary In2O3—SnO2 system. J. Mater. Sci., Vol. 42, pp. 7135—7140.

14. Naidich, Yu. V. (1972). Contact phenomena in metal melts. Kiyv: Nauk. dumka, 196 p. [in Russian].

15. Naidich, Y. V. (2013). Advancein the theory of ceramic/liquid metal systems wettability. Peculiarity of contact processes for transition and non–transitionmetals. Adgeziya rasplavov i paika materialov, Iss. 46, pp. 3—62 [in Ukrainian].

16. Naidich, Yu. V., Sydorenko, T. V. (2003). Аdhesion and contact interaction of metal melts with barium titanate and other perovsictic materials. Kiyv: Nauk. dumka, 156 р. [in Russian].

17. Ommer, M., Klotz, U. E., Fallheier I. (2009). Wetting phenomena in Ag-based contact materials. VI Int. conf. High Temperature Capillarity, Athens, 158 p.

18. Durov, O. V. (2004). Wetting and contact interaction of materials based on zirconium oxide with metal melts. Avtoreferat diss. na soiskanie stepeny kand. chimicheskix nauk, Kyyv, 26 p. [in Russian].

19. Shen, P., Fujii, Н., Nogi, К. (2006). Wettability of polycrystalline rutile TiO2 by molten Al in different atmospheres. Acta Mater., Vol. 54, pp. 1559—1569. http://dx.doi.org/10.1016/j.actamat.2005.11.024

20. Bursian, E. V. (1974). Nonlinear crystal (barium titanate). Moskva: Nauka, 295 p. [in Russian].

21. Naidich, Yu. V. (1981). The wettability of solids by liquid metals. Progress in Surface and Membrane Science, New York: Academic Press, Inc., pp. 353—484. http://dx.doi.org/10.1016/B978-0-12-571814-1.50011-7