Вибори директора
  1. Головна
  2. Структура
  3. Матеріалознавство порошкових та композиційних матеріалів і покриттів
  4. Публікація

Hydrogen generation by hydrolysis of metals and hydrides for portable energy supply

V. Yartys 1,
 
I. Zavaliy 2,
 
Yu. Pirskyy 3,
 
Ю.М.Солонін 4,
 
V. Berezovets 2,
 
F. Manilevich 3,
 
Yu. Verbovytskyy 2,
 
A. Kutsyi 3,
 
A. Kytsya 5
 

1 Institute for Energy Technology, Kjeller NO-2027 , Норвегія
2 Фізико-механічний інститут ім. Г.В. Карпенка НАНУ, Львів, Україна
3 Інститут загальної та неорганічної хімії ім. В. І. Вернадського НАН України , Київ
4 Інститут проблем матеріалознавства ім. І. М. Францевича НАН України , вул. Омеляна Пріцака, 3, Київ, 03142, Україна
5 Кафедра фізичної хімії викопного палива Інституту фізико-органічної хімії і вуглехімії ім.Л.М.Литвиненка, НАНУ, Львів

ВОДНЕВІ ТЕХНОЛОГІЇ ЗБЕРІГАННЯ ЕНЕРГІЇ: СТАН ТА ПЕРСПЕКТИВИ РОЗВИТКУ - Львів: Простір-М, 2021
https://doi.org/10.15407/materials2021.015

Анотація

NATO project G 5233 “Portable energy supply” was executed by 4 teams (Institute for Energy Technology, Norway and 3 Institutes of the National Academy of Sciences of Ukraine). G5233 Project was focused on the development of hydrogen fueled portable energy supply systems integrating hydrogen generation and storage units based on use of light metals, metal and complex hydride materials and portable fuel cells. The weight efficient energy supply device was developed by using these selected materials and performance-optimised NaBH4 complex hydride. Besides, various new relevant units of equipment for the samples preparation and characterization were ordered and accommodated in the participants labs and the program of training of young scientists at IFE, Norway was accomplished. Different types of materials for hydrogen generation were synthesized and characterized (activated aluminium alloys, Mg-Al alloys, MgH2 and their composites, NaBH4 with catalytic additives). The challenging objective of reaching a completeness of the hydrolysis of MgH2 was achieved; the reaction conditions were optimized and the particular focus applications integrating efficient hydrogen generation systems were identified. The mechanism and the kinetics model of the hydrolysis process of MgH2 in water solutions have been proposed which successfully describe the experimental data. In parallel with the hydrolysis reaction resulting in hydrogen generation and formation of Mg(OH)2 , the process involves passivation of the MgH2 surface by the formed Mg(OH)2 precipitate followed by its re-passivation with the rate constants of these processes being established. Increase of the concentration of MgCl2 leads to just a minor increase in the rate constant of the interaction of MgH2 with water but leads to a sharp increase of the rate constant of the repassivation of MgH2 surface. To achieve efficient hydrolysis of NaBH4 , different types of catalysts (heterogeneous on the basis of Pt and "homogeneous" - salts of Ni+2 and Co+2) were studied and optimized. Several systems were selected as candidates to provide the required hydrogen flow to operate a 30 W fuel cell over a given time exceeding 1 hour, based on a use of inexpensive and affordable hydrogen-containing materials and catalytic additives. 3 individual hydrolysis workstations (1 in Norway and 2 in Ukraine) were built, tested and optimized. The plan of the work to reach the objectives of the Project G5233 “Portable energy supply” is completely accomplished, all the milestones are successfully fulfilled and the overall goal of the Project is reached.


Завантажити повний текст

ГЕНЕРАЦІЯ ВОДНЮ, ГІДРОЛІЗ, ДОБАВКИ КАТАЛІЗАТОРА, ПОРТАТИВНІ ЕНЕРГЕТИЧНІ СИСТЕМИ, СКЛАДНІ ГІДРИДИ

Посилання

[1] Sakintuna B., Lamari-Darkrim F., Hirscher M. Metal hydride materials for solid hydrogen storage: A review. Int. J. Hydrogen Energy, 2007, vol.32, pp. 1121-1140.

[2] Huot J., Ravnsbæk D.B., Zhang J., et al. Mechanochemical synthesis of hydrogen storage materials, Prog. Mater. Sci., 2013, vol.58, рр.30–75.

[3] Ross D.K. Hydrogen storage: The major technological barrier to the development of hydrogen fuel cell cars, Vacuum, 2006, vol.80, pp. 1084- 1089.

[4] Gandía Luis M., Arzamendi Gurutze, Diéguez Pedro M. (Eds.). Renewable Hydrogen Technologies. Production, Purification, Storage, Applications and Safety, Elsevier,
Amsterdam, 2013, 472 pp.
[5] Yartys V. A., Lototsky M. V. An overview of hydrogen storage methods, Hydrogen Mat. Sci. Chem. of Carbon Nanomat. (Proceed. ICHMS’2003), 2004, pp. 75-104.

[6] Jain I.P., Jain P., Jain A. Novel hydrogen storage materials: A review of lightweight complex hydrides, J. Alloys Compd., 2010, vol. 503, pp. 303-339.

[7] Ley M.B., Jepsen L.H., Lee Y.-S. et al. Complex hydrides for hydrogen storage – new perspectives, Mat. Today, 2014, vol.17, pp. 122- 128.

[8] Rango P., Marty P., Fruchart D. Hydrogen storage systems based on magnesium hydride: from laboratory tests to fuel cell integration, Appl. Phys. A, 2016, vol.122, 126 (1-20 pp.).

[9] Wang H.Z., Leung D.Y.C., Leung M.K.H., Ni M. A review on hydrogen production using aluminum and aluminum alloys, Renew. Sustain. Energy Reviews, 2009, vol.13, pp. 845-853.

[10] Grosjean M.-H., Zidoune M., Roué L., Huot J.-Y. Hydrogen production via hydrolysis reaction from ball-milled Mg-based materials, Int. J. Hydrogen Energy, 2006, vol.31, pp.
109-119.

[11] Ouyang L., Ma M., Huang M. et.al. Enhanced Hydrogen Generation Properties of MgH 2 -Based Hydrides by Breaking the Magnesium Hydroxide Passivation Layer, Energies, 2015, vol.8, pp. 4237-4252.

[12] Lewis N.S., Abarbanel H., Bildsten L., et al. JASON report JSR-02- 135, The MITRE Corp., McLean, Virginia, June, 2003.

[13] Manilevich F.D., Kozin L.Kh., Danil'tsev B.I., Kutsyi A.V., Pirskyy Yu. K. Regularities of the hydrolysis of aluminum activated with the eutectic alloy of gallium, indium, and tin. Ukr. Khim. Zh., 2017, vol. 83, pp. 51-59.

[14] Manilevich F.D., Pirskyy Yu.K., Kutsyi A.V., Danil'tsev B.I. Regularities of hydrolysis of aluminum activated by Ga-In-Sn eutectic alloy and zinc. Ukr. Khim. Zh., 2020, vol. 86, pp. 63-77.

[15] Manilevich F.D., Pirskyy Yu.K., Danil'tsev B.I., Kutsyi A.V., and Yartys V.A. Studies of the hydrolysis of aluminum activated by additions of Ga–In–Sn eutectic alloy, bismuth or antimony. Mater. Sci., 2020, vol. 55, pp. 536–547.

[16] Manilevich F.D., Pirskyy Yu.K., Kutsyi A.V., Berezovets V.V., Yartys V.A. Studies of mechanochemically activated aluminum powders for hydrogen generation from water.
Powder Metallurgy, 2021, No. 5/6. pp. 14-24.

Публікації